Surface Preparation Technology, Inc.
Research & Publications Project Design Rumble Stips and Bicycles NOISEPRINT -- Shoulder Rumble Strips by SPT
Run-Off Accidents Rolled vs. Milled Contracting Services
Main Page Links Contact Information
Main Page > Project Design > Centerline & Secondary Road Rumble Strips
Centerline Rumble Strips & Head-on crashes

Centerline & Secondary Road Rumble Strips

Motorists traveling along rural secondary roads stand to benefit from rumble strips every bit as much as those traveling along the interstates already do.

Highway authorities typically place rumble strips along their interstate shoulders first because these roads handle the highest traffic volumes. Less-traveled secondary roads, however, stand to realize an equal and often greater benefit from the use of shoulder and centerline rumble strips.

Secondary roads have narrow shoulders and that means drifting drivers have less time to correct even when traveling at slower speeds. Also, trees, embankments, rocks, ledges and other dangers typically lie much closer to passing traffic along secondary roads, than they do along the interstates.


Back to top

Centerline Rumble Strips & Head-on crashes

On this project in Pennsylvania, SPT cut the standard 7 x 16-inch rumble strips through the centerline, but placed narrower cuts along the edgeline.

Centerline Rumble Strips & Head-on crashes:

Head-on crashes pose a serious threat on narrow, rural roadways where a driver can drift into the wrong lane in a moment of inattention.

Centerline rumble strips must deliver a resounding alert the moment the driver begins to drift. The 7 x 16 x 1/2 inch rumble strip used on highway shoulders throughout the United States has prevented countless head-on crashes when placed along the centerline of secondary roads.


Photo 1

click image for larger view
Photo 2

click image for larger view
Photo 3

click image for larger view
Photo 4

click image for larger view

Back to top

Research & Publications  |  Project Design  |  Rumble Strips & Bicycles  |  Run-off Accidents  |  Rolled vs. Milled

Contracting Services  |  Main PageLinks  |  Contact Information